Choosing Semi Trucks Isn’t Hard To Do When You Understand Your Needs

Have you ever thought about what goes into semi trucks these days? You must understand what goes into one of these popular vehicles so you can make the right decision when buying one for your business or industrial use.

What Is the GVM?

The GVM, or gross vehicle mass, is a critical part of the truck that you must always think about. This refers to how much your vehicle can weigh when in a bare state. That is, it is the weight of the semi truck minus the fuel, oil, cargo and passengers.

Today’s vehicles can hold GVM rates of at least 16,500 kg with some options covering more than 25,000 kg. The heavier ones tend to handle more weight and will not break down or wear out while in use. This in turn should make it easier for you to tow more items with such a vehicle.

Review the Engine Power

The engine power is critical to the success of all Japanese semi trucks in that the engine needs to be strong enough to actually propel the vehicle and all its weight forward. You can use a good truck that works with eight or even ten cylinders in its engine to generate enough power.

A vehicle with 270 kW or more power at 1800 rpm is always a great choice to have. This is strong enough for most of your needs and won’t be all that hard to drive with in many cases.

This may also be paired with the torque in your truck. Many semi trucks, particularly ones out of Japan, can operate with 1800 Nm of torque, a total that can be attained at 1000 rpm or even higher depending on what you use. Naturally, the vehicles with the largest engines tend to have the most torque. You need this to give your vehicle the best towing support possible.

Don’t Forget the Technology

While the engine and mass of a Japanese semi truck can be important, you especially need a truck that has all the bells and whistles needed to give you more control over what you want to do while on the road. A great truck like this can come with features like a telematics system that identifies information on how much weight you are towing in real time. A rear view camera that lists details on what’s behind your vehicle can also be used. This information can give you details on what’s going on where you are and will help you navigate properly.

Many semi trucks can also include media units. These include items that allow people to interact directly with other trucks through a wireless system, GPS sensors to review one’s location and even special units that allow people to collect information that you get from weighing stations. These allow a driver to get in touch with others while keeping tabs of what’s happening in the truck.

You can contact UD Trucks to see what you can get out of any of these special semi vehicles. You can visit udtrucks.com to see what you can use for your trucks so you’ll get the protection and coverage you need. http://www.udtrucks.com/en-au/trucks